An established care home in Swindon is a warmer and safer place thanks to the specification of Stelrad LST radiators as part of an overall refurbishment project. The Ridings Care Home provides 32 self-contained flats offering a mix of one and two bedroomed accommodation, for a mix of active elderly individuals and couples, some with 24 hour care needs.
The care home – one of many owned and managed by The Guinness Partnership - used to feature an ageing electric underfloor heating system with electric immersion heaters providing hot water. As well as being ‘past its sell by date’, it was expensive to run option and needed upgrading and replacing with modern energy efficient and reliable heating options. Hewer FM, based in Gloucester was selected to replace the heating for the care home and the old system was ripped out and replaced by a traditional wet heating system using three modern gas fired condensing boilers to provide the heating source, and two further gas boilers operating in conjunction with solar thermal and solar PV panels to preheat the cylinder and provide hot water.
Because of the differing levels of disability and care requirements in the home, LSTs – low surface temperature radiators – were selected. These comply with the strict requirements of the NHS Guidance
In all, more than eighty Stelrad LSTi Plus K2 radiators were supplied for this project to heat the flats, the corridors and other public areas of the care home and The Guinness Partnership is very happy with its investment so far: “When you are providing a home for elderly tenants, warmth and safety are the two key features of the property and the Stelrad LSTi’s, as part of this new heating system, offer both perfectly,” says The Guinness Partnership’s Oliver Wilkinson. “As well as being effective and safe, they are aesthetically pleasing and blend in nicely in both the rooms and the wider care home – the covers for the radiators look good and have rounded edges to ensure there are no sharp edges to touch or fall against and have the added benefit of being finished in a long-lasting anti-bacterial coating which is perfect for an environment such as this. The smooth fronted casings are easy to keep clean and hygienic.”
HewerFM’s John Hendzel was the contract manager responsible for the Ridings project: “The LST i Plus from Stelrad is supplied with the addition of an integral remote sensing thermostatic valve to allow adjustment of room air temperature, making it even more energy efficient than other LST radiators, as well as offering an arthritic adaptor that makes it far easier for older people who may have grip problems to adjust the level of heat in their rooms. There are also additional components to discourage unauthorised tampering for the radiators situated in public areas of the building. Importantly the LST i Plus features curved casing edges which ensures no square edges to damage anyone falling against it. The design has been well thought through and provides an ideal solution for heating in a property such as this one.”
Each Stelrad LST emitter provides high outputs through convection for outstanding heat performance and is guaranteed to perform to a maximum working pressure of 116 psi (8 bar) and conform to BE EN 442 – the European standard for radiators.
Full details of the range of Stelrad LSTs can be found at its website at www.stelrad.com.