Latest News Tue, Mar 22, 2016 5:13 PM
Fast, easy installation and enhanced safety are among the key benefits of the Luminaire Supporting Coupler (LSC) plug-in lighting system from Eaton.
Fully compliant with BS7001, couplers in the LSC range are recognised as the industry standard interface and, for maximum convenience and flexibility, they are fully interchangeable with other manufacturers’ products that meet this standard.
All products in the range are available in three-pin versions for standard lighting power applications, and four-pin versions for use where an additional live conductor, such as a maintained live for emergency lighting, is needed. Three pin plugs can be safely used in either three or four-pin outlets and, for ease of recognition; four-pin plugs normally have red covers.
Backplates in the LSC range are rated at 6 A and have been specifically designed for speedy convenient installation. Complete with retained mounting screws to help prevent them dropping out during installation, they incorporate large terminals which can accept up to two 4 mm2 cables and which are supplied fully open, ready for immediate cable insertion. The terminals are arranged for rear entry to ensure ease of wiring, and they feature large, clear markings that remain readily legible even in poor lighting conditions.
The plugs in the range are available in a wide selection of pre-wired versions, fitted with either heat-resistant PVC or low smoke and fume LSF cables in a choice of standard lengths up to 5 m. The LSC couplers will support loads of up to 5 kg. The plugs are also available without cables fitted in re-wireable versions, which feature snap-on quick-release covers.
To simplify ordering and stocking, products in the LSC range can be supplied as complete ceiling assemblies, with or without cables, under a single part number. Each assembly comprises a backplate, a plug or a pre-wired plug and a cover that fits over the whole installation to give a neat, attractive appearance. Alternatively, all items can be ordered separately.
Also available in the LSC range are LDU multi-outlet boxes with 6, 8, 10 or 12 sockets that accept standard LSC plugs. Designed to provide a convenient lighting power interface, these boxes allow multiple luminaires to be individually plugged in and unplugged, which means that work can safely be carried out on a specific luminaire or luminaires without the need to isolate the whole lighting circuit. LDU multi-outlet boxes are compatible with both three- and four-pin applications and will accept either connector.
Featured News
The Royal Institute of British Architects (RIBA) has published the findings of its...
The latest Royal Institution of Chartered Surveyors (RICS) Residential Market Survey...
BUILDING PRODUCT LIBRARY - LATEST BROCHURES
Novantica - Cement F...
By Fassa Bortolo
Fassatherm System -...
By Fassa Bortolo
Fassarend System - P...
By Fassa Bortolo
Fassalime System - P...
By Fassa Bortolo
Sport England’s Perf...
By Passivent
BUILDING PRODUCT DIRECTORY - LATEST PRODUCTS
Straightcurve® – headquartered in Australia, is renowned for high-end innovative garden edging,...
The Kingspan RLG600 raised access floor panel is intended for light office use and is capable of...
Kingspan RHG600 Simploc is the heavy grade floor system, capable of handling up to a 12kN/m2...
CONSTRUCTION VIDEOS - LATEST VIDEOS
“Building with stone wool insulated sandwich panels” written by Professor Imperadori, is now...
Portakabin | Installation at the iconic Admiralty Arch, London