Common faults lead to fire door failure

Latest News Wed, Sep 27, 2017 6:04 AM

A fire door test which replicates the seven most common defects spotted in social housing flats and apartments shows just how quickly those doors will fail if incorrectly specified and installed.

As part of Fire Door Safety Week (25 September – 1 October), the BWF-Certifire Scheme has released a dramatic video of a fire door burn test.

The video compares two almost identical fire doors with the same fire rating – FD30, meaning the door should provide at least 30 minutes of protection. This is the most common integrity rating for UK fire doors.

One door is correctly specified and installed, but the other has a series of faults which are frequently identified:

  • The door is secured with only two, non-fire rated, standard hinges (For a standard height fire door, a minimum of three hinges should be installed to prevent the door from warping in a fire.)
  • There are excessive gaps between the side of the door and the frame. (The gaps around the door should be less than 4mm once the door is shut.)
  • Intumescent and smoke seals are missing. (These are vital to the fire door’s performance as they fill the gap between the door and frame when the door is closed.)
  • The door has a non-fire rated letter plate. (Letter plates must be suitable for use on the specific fire door and detailed on the fire door certificate as a compatible component. Letter plates must also be fitted in the correct location within the fire door leaf and fitted with the correct intumescent protection and fixings.)
  • The air transfer grille does not have an intumescent block fitted inside.
  • Intumescent edge protection is missing around the glazing bead.
  • A non-fire rated panel was installed above the door.

The video shows the incorrectly specified fire door failing long before the 30 minutes it should last, highlighting the importance of correct fire door installation and maintenance. Without the protection of intumescent interlayer and intumescent seals, the faulty door allows smoke to pour through the gaps after just four and a half minutes.

Hannah Mansell, BWF technical manager and spokesperson for Fire Door Safety Week, says: “This test is not an academic exercise. This is about life and death. Just imagine being in front of a faulty fire door, relying on it to buy you time to be saved from a fire, and seeing it fail before your eyes.

“Fire doors are in almost every building where we work, live and sleep and they are often never given a second thought. But they must be specified, fitted and maintained correctly with compatible components that have been third-party certificated. This is the only way to ensure that the fire door performs to its intended fire rating. Every tiny detail and every split-second counts.”

All BWF-Certifire members offer third-party certificated fire doors and components that have been rigorously assessed and audited. Through the scheme approximately 2.5 million fire doors are tested and certified each year.

This year’s Fire Door Safety Week campaign is raising awareness of the critical role of third-party certificated fire doors in high-rise buildings, houses of multiple occupancy and other types of shared accommodation.

Featured News

Specification news
Century-old social housing estate takes triple honours...

The Sutton Estate in Chelsea, one of Britain’s earliest purpose-built social...

Read More >>

Specification news
Wade floor drainage from Alumasc: sleek design –...

For more than 60 years, Wade has stood at the forefront of quality drainage design...

Read More >>

BUILDING PRODUCT LIBRARY - LATEST BROCHURES

Valley Through Range Brochure

Valley Through Range
By Filon Products Limit...

Download Now >>

Safer Replacement Starts Below. Filon Fixsafe. Brochure

Safer Replacement St...
By Filon Products Limit...

Download Now >>

A Smart Way to Refurbish Profiled Roofs. Over-Roofing. Brochure

A Smart Way to Refur...
By Filon Products Limit...

Download Now >>

Site Assembled Rooflights & Specialist GRP Sheets Brochure

Site Assembled Roofl...
By Filon Products Limit...

Download Now >>

Factory-Assembled Multi-Layer GRP Rooflights Brochure

Factory-Assembled Mu...
By Filon Products Limit...

Download Now >>

BUILDING PRODUCT DIRECTORY - LATEST PRODUCTS

Magply multi-functional board
Magply multi-functional board

Rainscreen CladdingAs a high performance, multi-functional board Magply features a Magnesium...

Read More >>

Magply recovery and protection boards
Magply recovery and protection boards

Magply recovery and protection boards have been developed to meet the roofing industry needs for a...

Read More >>

Safeshield XT Reflect
Safeshield XT Reflect

Safeshield XT Reflect is an A2-s1, d0 fire rated construction membrane for the use in high risk,...

Read More >>

CONSTRUCTION VIDEOS - LATEST VIDEOS

Introducing the all-new weberpral E
Introducing the all-new weberpral E

A high-performance monocouche render with 22% lower carbon emissions from fossil fuels* - helping...

Watch Now >>

Fortitude™ Steel Railing Systems: Adjustable Off-the-Shelf Balustrade Guide
Fortitude™ Steel Railing Systems: Adjustable Off-the-Shelf Balustrade Guide

Fortitude Steel Railings and Balustrades are one of the most versatile, off-the-shelf, steel...

Watch Now >>

Pro-Railing® Stainless Steel Handrail Systems: 6 Modern Balustrade & Glass Railing Solutions
Pro-Railing® Stainless Steel Handrail Systems: 6 Modern Balustrade & Glass Railing Solutions

Pro-Railing® – our Stainless Steel Handrail Component System with six stunning ranges to choose...

Watch Now >>