The new Gaia Decoupling Membrane is quick to install and two products in one.
Firstly, as a decoupling
membrane guarding against movement in the sub floor which can cause tiles to
crack and secondly as a heating cable carrier providing warmth to floors.The polypropylene membrane has rounded square
shaped studs that form channels specially designed to embed and fasten electric
heating cables.
Coupled with the Gaia Heating
Cable the system is ideal for small or large installations and awkward areas
within a property where flexibility is required.Depending on the cable spacing the cable can
provide a power output for either primary or secondary heat.
Available in 5m and 15m rolls,
the Gaia Decoupling Membrane is a decoupling membrane of 5.5mm in thickness
that does not require expansion joints in the screed before laying ceramic and
natural stone tiles.It’s also a
waterproof membrane when the Gaia waterproofing tape and sealant is used.With the Gaia heating cables available from
10m lengths to 165m lengths, we can cover any project area size.
The system provides comfortable
warm floors allowing the heat from the electric cable to be distributed evenly
across the floor.It’s a polypropylene
membrane with rounded square shaped studs that forms channels specially
designed to embed and fasten the electric heating cables.
Typically used in areas where
the floor covering is tile, the system can also be used with varying floor
coverings such as carpet, vinyl and timber floors.Full instructions, recommendations and
technical information is provided with the product to ensure the correct
installation and product care is taken.Gaia offer the full service, from project start to project
completion.We can supply the product
for your contractor to install or alternatively our operation team can visit
site to carry out the install.
Gaia Underfloor Heating is fully backed with a technical and design team to support you throughout the project.
