Gate Leaves
The gate leaves are constructed from a 60 x 40mm RHS perimeter frame with 25mm diameter tubes fitted vertically at 125mm centres. A mid-rail is supplied for strengthening purposes.
Top Track
Galvanised steel inverted channel section in which pulleys mounted on each leading edge run in and on.
Bottom Support
The gates are supported on floor bearings mounted at the side behind each jamb.
Door Arrangements
The standard arrangement comprises two leaves each side folding at 90 degrees to the opening.
Ironmongery
Handles are attached to each leading edge to allow manual operation in the event of power failure.
Finish
Galvanised as standard. Polyester powder coating to a range of standard RAL colours is available at extra cost.
Weight
Varies dependant on gate construction but typically 40 kgs per m2.
Operation
Electrical operation is via two single phase motors mounted on the top of each pair of leaves with a common control panel and operating buttons. Disconnection to manual operation is provided in the event of power failure. Other controls are available at extra cost.
BUILDING PRODUCT LIBRARY - LATEST BROCHURES
Bi-Fold Gates
By Security Products -...
BUILDING PRODUCT DIRECTORY - LATEST PRODUCTS
Bolton Gate Company’s horizontal shutter is ideally suited to provide security compartmentation...
Contour is an electrically operated lateral rolling shutter purpose designed to negotiate bends,...
Gate FrameConstructed from 25mm hot rolled channel pickets interconnected by 30 x 10mm solid lattice...