Curtain
Constructed from galvanised steel tubes and links to form a parallel mesh size of 500mm x 85mm with end caps fitted to the end of each tube to prevent lateral movement.
Bottom Rail
Fabricated from two steel angles to form an inverted “tee” section and powder coated silver.
Guides
The side guides are formed from galvanised steel channels and prepared for fixing to the opening structure by means of continuous fixing angles.
Endplates
Fabricated from mild steel of adequate thickness relative to door size and supplied with angles for fixing to the structure.
Roller
The roller is manufactured from mild steel tube of sufficient diameter and wall thickness to resist deflection and is mounted in bearings or cups on each end plate.
Finish
Galvanised. Polyester powder coating to a standard range of RAL colours is available at extra cost.
Weight
Approximately 25 kgs per m².
Operation
Electrical operation is by means of a direct drive 3 phase geared motor mounted on the outside of one endplate. The motor has an inherent safety brake thus meeting all relevant Health & Safety requirements.
Controls
The standard controls are by means of open / close / stop push buttons fitted adjacent to the shutter. Other types of control are available at extra cost.
Casings
Coil casings fabricated from galvanised steel sheet are available as an optional extra.
BUILDING PRODUCT LIBRARY - LATEST BROCHURES
Bi-Fold Gates
By Security Products -...
Collapsible Gates Da...
By Security Products -...
Contour Roller Shutt...
By Security Products -...
Eurofold Folding Shu...
By Security Products -...
Multifold Gates data...
By Security Products -...
BUILDING PRODUCT DIRECTORY - LATEST PRODUCTS
Bolton Gate Company’s horizontal shutter is ideally suited to provide security compartmentation...
Contour is an electrically operated lateral rolling shutter purpose designed to negotiate bends,...
Gate FrameConstructed from 25mm hot rolled channel pickets interconnected by 30 x 10mm solid lattice...