Security Rating
When tested by the Loss Prevention Council the door achieved Grade 4 security in accordance with LPS 1175.
Door Panels
Constructed from double skin steel sheets 3mm thick infilled with high-density insulation and special reinforcing material. The door panels are 56mm thick and are flush in appearance.
Top Track
Galvanised steel rolled section forming a box-type track in which pulleys mounted on the top of the door panels run. A branch track is incorporated to allow the door to stack correctly.
Bottom Track
A galvanised steel bottom track is recessed into the floor and acts as a guide.
Door Arrangements
The doors stack to one side and comprise between four and eight panels. They are face fixed to the inside and the panels stack at 90 degrees to the opening when open.
Finish
Galvanised as standard. Polyester powder coating to a range of standard RAL colours is available at extra cost.
Weight
The doors weigh approximately 80 kgs per m2.
Locking
The leading edge of the door is locked into position by means of two electrically interlocked pad-bars and Chubb 1K11 padlocks.
Operation
Electrical operation is via a three phase geared motor mounted on the top track at one or both ends. Push button controls are provided at low level and emergency manual operation is via hand chain which is connected and disconnected at low level.
BUILDING PRODUCT LIBRARY - LATEST BROCHURES
SUPERFOLD 4000 & 500...
By Security Products -...
BUILDING PRODUCT DIRECTORY - LATEST PRODUCTS
Bolton Gate Company’s horizontal shutter is ideally suited to provide security compartmentation...
Contour is an electrically operated lateral rolling shutter purpose designed to negotiate bends,...
Gate FrameConstructed from 25mm hot rolled channel pickets interconnected by 30 x 10mm solid lattice...