Packaging firm turns to Ambirad to keep factory cool

Sustainability Tue, Mar 22, 2016 5:21 PM

Packaging firm turns to Ambirad to keep factory cool

Following the move to its state-of-the-art facility near Fareham, healthcare packaging company Contego Packaging was looking for an energy-efficient and more cost-effective way to cool internal air in its new factory.

The solution was found in ColdAir from Ambirad, an evaporative cooling system which cools the air using a natural principle and consumes 80% less energy than conventional air conditioning.

Proven in industrial and commercial premises across the UK, AmbiRad’s ColdAir evaporative cooling system offered the client the most efficient way of cooling the production area of the 3072m2 factory and reducing the heat output from the manufacturing process.

These evaporative cooling systems provide a versatile, practical and low cost alternative to traditional air conditioning systems which are notoriously expensive to run and tricky to install.  Evaporative coolers are also cost-effective and can reduce the internal air temperature by just a few degrees when required.

For the Contego Packaging factory, Ambirad worked with specialist contractor MJG Mechanical Services Ltd on the installation of 15 ColdAIR RA150 units which were arranged in four zones, each controlled by network routers.  The roof mounted ColdAIR units are fitted with ducts dropping to four way diffusion terminals with adjustable horizontal flaps suspended at 4.5m above the floor level. Roof extract fans were coordinated to operate at the same time as the ColdAIR units and ensure the volume of inputted air is extracted to atmosphere.

Designed with energy efficiency in mind, the ColdAIR evaporative cooling system from AmbiRad uses only 20% of the energy used by traditional air conditioning.  ColdAIR makes use of the free latent energy in the atmosphere.  Cooling the internal environment by drawing air through continually wetted pads that surround the ColdAir unit, the system integrates this ‘natural air conditioning’ technique in an innovative way.

The ColdAIR does not rely on refrigerant gases (CFCs) in its operation, and as the evaporation of moisture into the air reduces the temperature – it filters the air through a damp pad to remove airborne contaminants.

With the ColdAIR evaporative cooling system from AmbiRad, Contego Packaging can benefit from a cooling system that is environmentally friendly and great value for money.

Featured News

Specification news
​Fassa Bortolo lime render - a sustainable solution...

In the pursuit of sustainable building materials, lime render has emerged as a key...

Read More >>

Specification news
Wetherby Wall Systems launches first fire-tested below...

Wetherby Wall Systems, part of the ROCKWOOL Group, is delighted to announce the...

Read More >>

BUILDING PRODUCT LIBRARY - LATEST BROCHURES

Your high performance facade panel. With James Hardie, It’s Possible™ Brochure

Your high performanc...
By James Hardie

Download Now >>

James Hardie brings unique designs to life with beautiful fibre cement products that are built to last. It’s Possible™ Brochure

James Hardie brings...
By James Hardie

Download Now >>

fermacell® The Specification Guide Brochure

fermacell® The Speci...
By James Hardie

Download Now >>

Hardie backer fibre cement backerboard for Tile & Stone  Brochure

Hardie backer fibre...
By James Hardie

Download Now >>

RIVERSTONE® - DISCOVER NATURAL PHYLLITE Brochure

RIVERSTONE® - DISCOV...
By SSQ

Download Now >>

BUILDING PRODUCT DIRECTORY - LATEST PRODUCTS

Senses White Fleck Kitchen Surfaces
Senses White Fleck Kitchen Surfaces

Senses Kitchen Surfaces. Beautifully Crafted, Effortlessly Maintained. The Senses range of...

Read More >>

SM 485: fast-setting, self-levelling smooth coat for interior floors
SM 485: fast-setting, self-levelling smooth coat for interior floors

FASSA's new SM 485: Your choice for a fast-setting, self-levelling smooth coat for interior floors,...

Read More >>

SL 416: A fast-setting, self-levelling smooth coat for interior floors
SL 416: A fast-setting, self-levelling smooth coat for interior floors

FASSA's new SL 416: A fast-setting, self-levelling smooth coat for interior floors. With superb...

Read More >>

CONSTRUCTION VIDEOS - LATEST VIDEOS

Specification Insights with Majestic London Showers
Specification Insights with Majestic London Showers

Specification Insights with Majestic London Showers

Watch Now >>

Discover the first-ever reference book for stone wool insulated sandwich panels
Discover the first-ever reference book for stone wool insulated sandwich panels

“Building with stone wool insulated sandwich panels” written by Professor Imperadori, is now...

Watch Now >>

Portakabin | Installation at the iconic Admiralty Arch, London
Portakabin | Installation at the iconic Admiralty Arch, London

Portakabin | Installation at the iconic Admiralty Arch, London

Watch Now >>